Test version · not yet public

Paint & powder coat stripping · Midlands & North West

Paint and powder coat stripping for jigs, hooks, racks and car bodies.

Thermal paint stripping at Arena Comet UK near Stoke-on-Trent. Paint, powder coat and other organic coatings come off steel parts in a 5 m × 2 m × 2 m pyrolysis oven, with no chemical strippers, no dip tanks and no hand scraping.

  • 5 × 2 × 2 mpyrolysis chamber
  • Whole car bodiesfit in one piece
  • No chemicalsthermal, not dip tanks
Open Santana pyrolysis oven at Arena Comet UK with a full red car body on the loading floor, showing the size of the chamber
Arena Comet UK · Newcastle-under-Lyme Santana pyrolysis oven Chamber 5 m long × 2 m wide × 2 m high. Shown with a complete car body inside.

Coating removed thermally, not by hand

Racks, hooks and car bodies in one piece

Collection & return can be arranged

Quote from a photo and dimensions

What we strip

Paint line equipment and metal parts, back to bare metal.

Paint, powder coat and other organic coatings are removed from steel and other heat-resistant metal. Typical work:

Powder-coated paint hooks and hangers on rails with thick coating build-up, before stripping

Hooks & hangers

Paint and powder coat build-up taken off hooks, hangers and contact tips so they make good electrical contact again.

Black paint line racks and frames on a blue stand waiting for stripping

Jigs, racks & frames

Powder coating and paint jigs, racks, forks and hanging frames, stripped in bulk so they go back into the line clean.

Red car body shell on a loading frame in front of the Santana pyrolysis oven at Arena Comet UK

Car bodies & chassis

Steel body shells, chassis and sub-frames for restoration, stripped in one piece. Tell us the metal and any non-metal parts first.

Painted blue metal frame next to the same type of frame stripped back to bare metal

Frames & fabrications

Welded frames, brackets and fabricated steelwork. Paint is removed from welds, joints and tight corners.

Painted steel grids and baskets stacked up before paint stripping

Grids, baskets & trays

Painted grating, wire baskets, racks and trays with coating built up in the mesh and corners.

Pile of white powder-coated steel brackets waiting for paint stripping

Brackets & small parts

Rejected or over-coated parts for re-coating, in baskets. Send a photo of the part and the batch size.

Before & after

What the oven leaves behind: bare metal.

Photos: Arena Comet UK and Arena Comet group.

How it works

Heat removes the coating. The metal stays intact.

Chemical dips, blasting and hand scraping take time, leave waste and miss tight corners. Pyrolysis removes paint and powder coat with a controlled thermal cycle instead.

  1. 01

    Controlled heating

    The parts are loaded into the oven and heated on a programme chosen for the part and the coating. The coating softens and starts to break down.

  2. 02

    Pyrolysis

    With little oxygen in the chamber, the paint breaks down into gases instead of burning on the part. The gases are destroyed in an afterburner.

  3. 03

    Controlled oxidation

    A final controlled stage removes the carbon left behind, leaving only a light, loose ash on the metal.

  4. 04

    Finishing

    Ash and pigment residue are rinsed or blown off, the parts are cooled slowly and checked before return.

Operator rinsing ash from cleaned parts in a booth after thermal cleaning
Finishing: ash is rinsed off after the thermal cycle.

After the oven

Finishing options, if you want the parts ready for the next step.

After pyrolysis the parts can go straight back to you. If you need them cleaner, or ready for re-coating or re-covering, a finishing step can be added. Blasting is available on request and can be arranged for UK customers. We confirm what is possible when we quote and agree it with you per job.

Straight back

Parts go back to you as they come out of the oven. Very often, but not always, with a light ash or dust residue on them, which many customers simply blow, wipe or wash off themselves.

Often used here

High-pressure wash

Ash and loose residue washed off with a high-pressure washer, so the parts come back visibly clean.

Ultrasonic bath

Fine holes, mesh and tight channels cleaned in an ultrasonic bath after the oven. Suited to precision parts.

Often used here

Glass bead blasting

On request. A gentle blast for delicate parts, leaving a clean, even finish.

Often used here

Sand blasting

On request. Takes off the last residue and leaves the metal with a uniform, slightly rough surface.

Often used here

Shot blasting

On request. A heavier blast for robust steel parts that must go back into the line or be re-coated.

Typical for paint racks, jigs and hooks: a wash, or shot or sand blasting arranged on request, before they go back into the line. Typical for frames and bodies that will be re-coated: blasting on request. Delicate small parts: glass bead blasting.

Why Arena Comet UK

Big chamber. Central location. Specialists in thermal cleaning.

5m × 2m × 2m

A chamber for large equipment

Full paint racks, long rails and complete car bodies fit in one piece. No cutting, splitting or partial stripping.

Central UK location

Parkhouse Industrial Estate, Newcastle-under-Lyme, near Stoke-on-Trent, with quick access to the M6 via the A500. Well placed for the Midlands and the North West.

No chemicals, no tanks

Thermal stripping avoids chemical strippers and open dip tanks. Coating is broken down in the oven and the gases are treated in an afterburner.

Part of the Arena Comet group

Arena Comet designs and builds thermal cleaning equipment and runs cleaning centres in Belgium, the UK, France, Poland and the Czech Republic.

One technical contact

Your enquiry is handled by a technical sales partner who knows the oven and the site.

From enquiry to clean part

Six steps. One point of contact.

  1. 1

    Send a photo

    Photo, dimensions, weight and material via the form below.

  2. 2

    Quote

    You receive a price and lead time for the job.

  3. 3

    Collect or deliver

    Drop off in Newcastle-under-Lyme or we arrange collection.

  4. 4

    Clean

    Pyrolysis cycle programmed for your part.

  5. 5

    Inspect

    Ash removed and the part checked before release.

  6. 6

    Return

    Packed and returned, ready for your next run.

FAQ

Questions about paint stripping.

How do you remove powder coating from metal parts in bulk?

In a pyrolysis oven. The parts are heated on a controlled programme so the powder coat or paint breaks down into gas and a light ash, which is then rinsed or blown off. Whole racks, hooks or baskets of parts can go in at once, which is much faster than stripping them one by one by hand or in a chemical tank.

What is thermal paint stripping?

Thermal paint stripping, also called burn-off or pyrolysis stripping, removes organic coatings with heat instead of chemicals. The coating breaks down in a low-oxygen oven and the gases are burned in an afterburner. It works on steel and other metals that can take the temperature.

Can you strip paint jigs, hooks and racks so they earth properly again?

Yes. Paint and powder coat build-up on jigs, hooks, hangers and racks is removed in the same oven, so they make proper electrical contact again and the coating line runs more consistently. Send a photo and the number of racks or hooks.

Can you strip a whole car body or chassis?

Steel car bodies and chassis fit in one piece in the 5 m × 2 m × 2 m chamber. Tell us the metal, the size and any non-metal parts such as seals, glass or plastic, and we will confirm the best approach before you ship anything.

Which metals can be stripped?

Steel and cast iron are the usual candidates. Aluminium, zinc, galvanised and other low-melting or heat-sensitive parts need to be discussed first, because heat can affect them. Always tell us the material.

How much does paint stripping cost?

The price depends on the size and weight of the parts, the amount of coating and the quantity. We do not publish a fixed price list. Send a photo and the dimensions and you receive a quote and lead time.

Your technical contact

Bart Joris, official sales partner of Arena Comet UK.

Your parts are cleaned by Arena Comet UK in Newcastle-under-Lyme, and you deal with Bart. He installed and maintained Arena cleaning machines at customer sites as a field service technician, and later started up and ran Arena's UK cleaning centre in Stoke himself. He gives you honest advice on whether a part suits pyrolysis, answers quickly and follows the job from first photo to return.

+32 472 79 31 43 · bart.joris@tuneitup.be

Request a quote

Send us a photo. We'll tell you if it fits and what it costs.

The more we know, the faster and more accurate the quote: overall dimensions, weight, the material and how much build-up there is.

Where the work is done

Arena Comet UK Ltd
Unit 59 Brick Kiln Lane
Parkhouse Industrial Estate West
Newcastle-under-Lyme ST5 7AS
United Kingdom

Opening hours: Mon–Fri, 08:00–16:00

Bart Joris: +32 472 79 31 43 · bart.joris@tuneitup.be

Enquiries via this website are handled by TuneItUp BV, official sales partner of Arena Comet UK Ltd.

Test version: submissions are not emailed to anyone yet. Your details are only used to answer your enquiry.

Get a quote